Canon 2010F - Manual (Page 61)

Margin Mode 3-6
Special Cop
ying F
eatures
3
3
Press [F2] (MARGIN).
4
Press [F1] (LEFT MARGIN), [F2] (RIGHT MARGIN), [F3] (TOP
MARGIN), or [F4] (BOTTOM MRGN) to specify the type of
margin
➞ press [OK].
The Margin Width setting menu appears for the margin type you selected.
5
Press [F3] (–) or [F4] (+) to set the margin width (1 mm to 20
mm)
➞ press [OK].
You can also use the numeric keys to enter the margin width, and (Clear) to
clear the value.
If you enter a value outside the setting range, an error tone sounds. Enter a value
within the setting range.
The selected mode is set, and the Copy Basic Features screen appears.
NOTE
The default setting is ‘10 mm’.
F2
F1
F2
F3
F4
OK
F3
F4
OK C