Canon 2010F - Manual (Page 15)

Flow of Copy Operations 1-6
Introduction to Cop
ying
1
2
Place your original.
You can place your original both vertically and horizontally in the feeder or on the
platen glass.
For instructions on placing your original, see “Placing Originals,” on p. 1-10.
NOTE
• LTR originals can be placed either vertically or horizontally. However, the scanning
speed for horizontally placed originals is somewhat slower than for vertically placed
originals. You can place originals horizontally when scanning with a Preset Zoom,
such as when enlarging LTR
to 11" x 17" .
• Horizontally placed LTR originals are referred to as LTR .
• 11" x 17" and LGL originals must be placed horizontally.
• If AUTO SORT is set to ‘01 ON’ from the Additional Functions menu, the Collate
mode is automatically set when the original is placed in the feeder. (See “Auto
Sort,” on p. 4-8.)
3
Set the desired copy mode on the Copy Basic Features
screen.
NOTE
On the Copy Basic Features screen, you can select the copy ratio, paper size, and
copy exposure and image quality settings.
COPY
FAX
Collate
Counter Check
Special F eatures
Displa y Contrast