Canon 2010F - Manual (Page 77)

Different Size Originals 3-22
Special Cop
ying F
eatures
3
Different Size Originals
This mode enables you to copy different size originals together in one group, as
long as they have one side with an equal length (i.e., LTR and 11" x 17"
). Just
make sure that the sides of the originals with the same length be lined up when you
place them in the feeder and the machine will automatically select the appropriate
paper size and copy ratio for each original.
In order to use the Different Size Originals mode, you need to assign this function to
a Shortcut key in the Additional Functions menu before making copies. (See “Using
Shortcut Keys,” on p. 4-15.)
IMPORTANT
• If the machine is operating in the Different Size Originals mode, you cannot use the
Two-Page Separation, Frame Erase, Image Combination, or Staple Sort modes.
• All originals placed together in the feeder must be the same weight (paper type).
NOTE
You can use the stack bypass for the Automatic Paper Selection when:
- The paper is loaded in the stack bypass
- The paper size has been specified in 06 USE STACK BYPASS in COMMON
SETTINGS from the Additional Functions menu
- Automatic Paper Selection is set to ‘02 ON’ for the stack bypass in the DRAWER
ELIGIBLTY menu
1
Press [COPY].
lights.
2
Place your originals in the feeder
➞ press the Shortcut key
([1] to [4]) where you registered the Different Size Originals
mode.
COPY
COPY
Reduce
1
Enlarge
2
Two Page Separation
3
Frame Erase
4