Canon 2010F - Manual (Page 66)

Frame Erase 3-11
Special Cop
ying F
eatures
3
NOTE
• You can set the Original Frame Erase mode only for the original sizes shown on the
LCD display.
• The machine automatically selects the copy paper size according to the original
size you set. <AUTO PAPER> is displayed; however, you can also select the paper
size manually.
6
Enter the desired copy quantity (1 to 99) using the numeric
keys.
For details about entering the copy quantity, see “Specifying the Required
Number of Copies,” on p. 2-2.
7
Press [Start].
Copying starts.
NOTE
• If you want to cancel this mode, press (Stop)
➞ the cancel job display appears
➞ press
(YES) or (NO).
• If you press (Stop) after copying has started, some blank sheets of paper may
print out.
• To cancel all settings and restore the machine’s standard settings, press
(Reset).
Book Frame Erase
This mode erases the dark border, as well as the center and contour lines that
appear when copying facing pages in a book onto a single sheet of paper.
IMPORTANT
If the machine is operating in the Book Frame Erase mode, you cannot use the Image
Combination, or Different Size Originals modes.
1
Press [COPY].
lights.
1 2 3
4 5 6
7 8 9
0
@.
GHI
PRS
ABC
JKL
TUV
DEF
MNO
WXY
OPER SYMBOLS
Start
F3 F4
COPY
COPY