Canon 2010F - Manual (Page 84)

Changing the Current Standard Settings 4-5
Customizing Settings
4
Zoom Ratio
This setting enables you to set the standard copy (zoom) ratio.
NOTE
The default setting is ‘100%’.
1
Press [Additional Functions]
➞ press [F3] (▼) or [F4] (▲) to
highlight <02 COPY SETTINGS>
➞ press [OK].
The COPY SETTINGS menu appears.
2
Press [F3] (
▼) or [F4] (▲) to highlight <02 STD ZOOM RATIO>
➞ press [OK].
Each time you press (
▼) or
(
▲), the next or previous menu option
becomes highlighted.
The STD ZOOM RATIO menu appears.
3
Press [F2] (–) or [F3] (+) to set the desired standard zoom ratio
(50% to 200%)
➞ press [OK].
You can also use the numeric keys to enter the standard zoom ratio, and
(Clear) to clear the value.
If you enter a value outside the setting range, an error tone sounds. Enter a value
within the setting range.
The selected mode is set, and the display returns to the COPY SETTINGS menu.
Additional Functions
F3
F4
OK
F3
F4
OK
F3 F4
F2
F3
OK C