Canon 2010F - Manual (Page 85)

Changing the Current Standard Settings 4-6
Customizing Settings
4
4
Press [Reset] to return to the Copy Basic Features screen.
Copy Quantity
This setting enables you to set the standard copy quantity.
NOTE
The default setting is ‘01’.
1
Press [Additional Functions]
➞ press [F3] (▼) or [F4] (▲) to
highlight <02 COPY SETTINGS>
➞ press [OK].
The COPY SETTINGS menu appears.
2
Press [F3] (
▼) or [F4] (▲) to highlight <03 STANDARD COPY
QTY>
➞ press [OK].
Each time you press (
▼) or
(
▲), the next or previous menu option
becomes highlighted.
The STANDARD COPY QTY menu appears.
3
Press [F2] (–) or [F3] (+) to set the desired standard copy
quantity (01 to 99)
➞ press [OK].
You can also use the numeric keys to enter the standard copy quantity, and
(Clear) to clear the value.
If you enter a value outside the setting range, an error tone sounds. Enter a value
within the setting range.
Reset
Additional Functions
F3
F4
OK
F3
F4
OK
F3 F4
F2
F3
OK
C