Canon 2010F User Manual
Page 17
Flow of Copy Operations
1-8
Introduction to Cop
ying
1
NOTE
If there is a current job, the machine scans the original, and waits to print it. Printing
starts when the current job is complete.
7
If you want to stop, interrupt, or copy another original during a
copy job, follow the instruction below.
● If you want to stop a copy job:
❑
Press [Stop].
❑
Press [F3] (YES).
● If you want to cancel a copy job in the standby mode:
❑
Press [Stop].
❑
Press [F2] (
▼) or [F3] (▲) to select the copy job you want to cancel ➞ press
[F4] (CANCEL).
NOTE
• After pressing
(Stop), several copies may continue to print out.
•
You can also cancel a copy job from the System Monitor screen. (See “Using the
System Monitor Screen,” on p. 1-17.)
● If you want to interrupt a copy job:
❑
To interrupt a copy job when you need to make priority copies, press [Interrupt].
For instructions on interrupting a copy job, see “Interrupt Mode,” on p. 1-20.
The message <ABLE TO PERFORM INTERRUPT JOB> appears on the LCD
display.
Stop
F3
Stop
F2
F3
F4
Interrupt