Canon 2010F - Manual (Page 65)

Frame Erase 3-10
Special Cop
ying F
eatures
3
• If the machine is operating in the Original Frame Erase mode, you cannot use the Image
Combination, or Different Size Originals mode.
NOTE
• You can set the Original Frame Erase width from 1 to 20 mm.
• The default setting is ‘2 mm’.
1
Press [COPY].
lights.
2
Place your original
➞ press [Special Features].
3
Press [F3] (FRAME ERASE).
4
Make sure that <FRAME ERASE> is selected
➞ press [OK].
The Original Size setting menu appears.
5
Press [F4] (ORIGNAL SIZE) to select the size of the original
➞
press [OK].
Each time you press (ORIGNAL SIZE), the next or previous menu option
becomes highlighted.
The selected mode is set, and the Copy Basic Features screen appears.
COPY
COPY
Special Features
F3
OK
F4
OK
F4