Winco DSE7300 Series - Manual (Page 110)

DSE7200 / 7300 Series Operators Manual
110
8.13.2 ADJUSTABLE PARAMETERS
Front Panel Configuration Editor
= Only available on DSE7220 / DSE7320 AMF Modules
Section Parameter as shown on display Settings
DISPLAY Contrast 0%
Language English
LCD Page Timer 0h 0m 0s
Auto Scroll Delay 0h 0m 0s
Current Date and time hh:mm
EDITOR Alt Config Default Config
ENGINE Oil Pressure Low Shutdown 0.00bar
Oil Pressure Low Pre Alarm 0.00bar
Coolant Temperature Low Warning 0ºC (If Configured)
Coolant Temperature High Pre Alarm 0ºC
Coolant Temperature High Shutdown 0ºC
Start Delay Off Load 0h 0m 0s
Start Delay On Load 0h 0m 0s
Start Delay Mains Fail 0h 0m 0s
Start Delay Telemetry 0h 0m 0s
Pre Heat Timer 0h 0m 0s
Crank Duration Timer 0m 0s
Crank Rest Timer 0m 0s
Safety On Delay 0m 0s
Smoke Limiting 0m 0s
Smoke Limiting Off 0m 0s
Warm Up Timer 0m 0s
Cool Down Time 0h 0m 0s
Engine Under Speed Shutdown Active / Inactive
Engine Under Speed Shutdown 0 rpm
Engine Under Speed Warning Active / Inactive
Engine Under Speed Warning 0 rpm
Engine Over Speed Warning Active / Inactive
Engine Over Speed Warning 0 rpm
Engine Over Speed Shutdown 0 rpm
Engine Speed Overshoot Delay 0m 0s
Engine Speed Overshoot 0%
Fail To Stop Delay 0m 0s
Battery Under Voltage Warning Active / Inactive
Battery Under voltage Warning Delay 0h 0m 0s
Battery Under Voltage 0 V
Battery Over Voltage Warning Active / Inactive
Battery Over Voltage Warning Delay 0h 0m 0s
Battery Over Voltage Warning 0 V
Charge Alternator Failure Warning Active / Inactive
Charge Alternator Failure Warning 0 V
Charge Alternator Warning Delay 0h 0m 0s
Charge Alternator Failure Shutdown Active / Inactive
Charge Alternator Failure Shutdown 0.0 V
Charge Alternator Shutdown Delay 0h 0m 0s
DPTC Auto Regeneration Inhibit Active / Inactive
Fuel Usage Alarm (Running Rate) 0% - 100%
Fuel Usage Alarm (Stopped Rate) 0% - 100%
Droop control Active / Inactive
Droop control 0%
GENERATOR Generator Under Voltage Shutdown 0 V
Generator Under Voltage Pre Alarm 0 V
Generator Nominal Voltage 0 V
Generator Over Voltage Pre Alarm 0 V
Generator Over Voltage Shutdown 0 V
Generator Under Frequency Shutdown 0 Hz
Generator Under Frequency Pre Alarm 0 Hz
Generator Nominal Frequency 0 Hz
Generator Over Frequency Pre Alarm 0 Hz
Generator Over Frequency Shutdown 0 Hz
Full Load Rating 0 A
KW Overload Trip 0%
Delayed Over Current Active / Inactive
Delayed Over Current 0%
AC System 3 Phase, 4 Wire
CT Primary 0 A
CT Secondary 0 A
Generator transient delay 0s
MAINS Mains Under Voltage Trip 0 V
Mains Over Voltage Trip 0 V
Mains Under Frequency Trip 0 Hz
Mains Over Frequency Trip 0 Hz
Mains Over Frequency Trip 0 Hz