YSI ProDSS - Manual (Page 15)

13
Operation
Keypad and navigation
Figure 7 Keypad description
1 System: Opens the system menu. Use to adjust
system settings
7 ON/OFF: Turn on or turn off the instrument
2 Exit/Escape key: Exits to the Run screen. When in
an alpha/numeric entry screen, returns to previous
menu
8 Right arrow key: Navigate right in an alpha/
numeric entry screen. On the Run screen, push to
show graphical representations of the displayed
measurements. Push the right or left arrow to return
to the Run screen. In the View Data screen, push to
view additional parameters in the data set
3 Left arrow key: Navigate left in an alpha/numeric
entry screen. Push to return to previous menu in all
screens except alpha/numeric entry. On the Run
screen, push to show graphical representations of
the displayed measurements. Push the right or left
arrow to return to the Run screen
9 Backlight: Turns the keypad backlight on or off for
use in low light conditions
4 Help: Shows context sensitive help 10 File: Opens the file menu. Use to view logged data
and GLP files, backup data to a USB stick, and delete
data
5 Up/down arrow keys: Scroll through menus or
enter numbers and letters
11 Calibrate: Opens the calibration menu. Use to
calibrate all parameters except temperature
6 Enter key: Push to confirm selections. On the Run
screen, push to log a single data point or start
continuous data logging
12 Probe: Opens the sensor menu. Use to setup
sensors, change the measurements shown on the
run screen, and turn on/off Auto Stable and GPS
3
2
1
4
5 6
7
9
8
10 10
11 12
5
?
Esc
Cal
ENTER
System Probe Calibration File