YSI ProDSS - Manual (Page 70)

68
KorDSS software installation
Install the KorDSS software
1. Insert the supplied USB flash drive into a USB port on your computer.
2. Depending on the PC operating system and system settings, the KorDSS Installer Guide may appear. If it does
not appear, double-click Start.exe to start the installer guide ( Figure 78 ).
NOTE: If desired, view the ProDSS User Manual or the end-user license agreement.
Figure 78 KorDSS Installer Guide
3. Click Install on the KorDSS Installer Guide.
4. Check the license agreement box. Click Install (
Figure 79 ).
Figure 79 KorDSS license agreement
5. You may be asked if you want to allow a program from an unknown publisher to make changes on the
computer. If so, select Yes.
KorDSS is now installed. Before using KorDSS to manage data, you must install the driver for the ProDSS instrument on
your PC.