Decorative effects, Effets decoratifs – SINGER WSL2000 (Part 2) User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

DECORATIVE EFFECTS

In addition to normal overlooking which is fully described in this
instruction book, your machine can also be used for a number

of decorative applications such as decorative top-stitching,
butted seams, pin-tucking or making lengths of decorative
braid. See below.

Decorative top-stitching - using three threads (flat seam)

Fold fabric along the line to be top-stitched and sew over the

folded edge, making sure not to cut into the fold. Fig. A.

Unfold the fabric, pull the ends of the threads to the underside
and press flat.

The final appearance can be enhanced by using buttonhole
twist or embroidery thread on the lower looper.

Butted seams - using three threads (flat seam)

Place two pieces of fabric wrong sides together and overlook
along the edge. Unfold and press.

By using different coloured fabrics and thread a pleasing
'patchwork' effect can be achieved.

Pin-tucking - using three threads

Fold fabric along a line to be pin-tucked and overlook sew along

the folded edge, making sure not to cut into the folded edge of
the fabric. (See page 56). Pull ends of threads to the underside

and press.

Making decorative braid - using three threads

Overlock over a cord or braid, holding it carefully with both
hands, making sure not to cut the edge. (See page 56).

NOTE: *lf you use blind hem foot (option, see page 62),

decorative stitch is made easily.

■“Reduce the upper looper tension when you use thick

thread.

EFFETS DECORATIFS

En

plus

de

leur

efficacité

pour

l'assemblage,

(es

surjeteuses-raseuses

peuvent

aussi

s'employer

pour

de

nombreux travaux décoratifs comme les coutures à plat, tes plis

dressés ou les bandeaux décoratife.
Voir ci-dessous.

POINTS DECORATIFS A PLAT-SEULEMENT AVEC 3 FILS
{SURFILAGE À PLAT)

Plier le tissu le long de la ligne à coudre et coudre sur le côté
plié, en étant sûr de ne pas couper dans le pli. Fig A.

Déplier le tissu, tirer les bouts finaux des fils sur l'envers et
repasser à plat.

L'apparence finale peut être optimisée par l'utilisation sur le
boudeur inférieur d'un fil de passe ou à broder spécial.

ASSEMBLAGE APLAT- SEULEMENT AVEC 3 FILS

(SURFILAGE À PLAT)

Plaçer deux morceaux de tissu à l'envers ensemble et surjeter
le long du bord. Déplier et repasser.

En utilisant des tissus de couleurs différentes et des fils
contrastés, on peut obtenir un joli effet "patchwork".

PLIS DRESSES - SEULEMENT AVEC 3 FILS

Plier le tissu à l'endroit du pli souhaité et coudre le long du
bord, en étant sûr de ne pas couper dans le pli (voir page 56).

Tirer les extrémités des fils vers l’envers et repasser le pli à plat.

BANDEAUX DECORATIFS - SEULEMENT AVEC 3 FILS

Piquer par dessus la bande (de part en part), en maintenant la
bande délicatement avec les deux mains. S'assurer de ne pas
couper le côté. (Voir page 56).

NOTE: *Si vous utilisez le pied à ourlet invisible (option, voir

page 63), vous pouvez facilement obtenir un
excellent point décoratif.

“Diminuer la tension du boudeur inférieur pour

l'utilisation d'un fil gros.

52

Advertising
This manual is related to the following products: