Inserting a zipper, Adjusting the zipper foot – SINGER 57815 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
S I N G E R
Inserting a zipper
Optional accessory
Preparation
Pattern: i
Needle Position:
Stitch Width:
Stitch Lenght: 2-5
Foot: Zipper (Optional)
Needle Plate: General Purpose (A)
Adjusting the zipper foot
When the zipper teeth are to the left of the needle (A):
• Slide the adjusting block, (1) which slides on the pin,
across to the right.
• Snap-on the foot to the left side of the pin.
When the zipper teeth are to the right of the needle (B):
• Slide the adjusting block, (1) across to the left.
• Snap-on the foot to the right side of the pin.
Advertising