How to remove and insert needles, To remove needle (s), To insert needle (s) – SINGER 14U354B User Manual
Page 10: How to remove and insert needle, To remove needle (s) • to insert needle (s)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8.
HOW TO REMOVE AND INSERT
NEEDLES
• TO REMOVE NEEDLE (S)
* Be sure to disconnect the machine from the
electric outlet before removing needle(s).
* Turn the hand wheel toward you until the needle
is at its highest position.
* Loosen, but do not remove the needle set screw
with the small screwdriver.
—
left needle set screw ®
- right needle set screw (2)
* Remove the needle(s).
* TO INSERT NEEDLE (S)
* Hold the needle with the flat surface to the back.
* Insert the needle into the needle clamp as far as it
will go.
Note:
The left needle (3) will be slightly higher
than the right needle (J).
* Securely tighten the needle set screw.
page 4 for additional needle information.
(
'll
jj')
r:
Flat surface to the rear