2) stretch overedge, To set the differential feed adjusting lever – SINGER 14U354B User Manual

Page 39

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

(2) Stretch overedge

(Use regular or rolled hemming throat plate)

* Stretch overedge is ideal for sewing decorative

collars, sleeves, skirt hems, etc. on loosely knit and
woven fabrics.

To set the differential feed adjusting lever

* Open looper cover and loosen differential feed

adjusting lever thumb screw.

* Slide adjusting lever upward above the center

mark, as required, to stretch, and tighten the

thumb screw.

* To sew a seam, apply gentle tension to the fabric

by holding the seam lightly in front and back of

the presser foot.


If amount of “stretch” is not correctly set in

relation to the fabric being sewn, the fabric is

apt to shift away from the needle resulting in
improperly sewn overedge seam. In such case,
reset differential feed adjusting lever closer to
the center mark.

* Be sure to reset the differential feed adjusting lever

to center mark for normal overedge stitching.

This manual is related to the following products: