Machine set up – SINGER 14U354B User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

20.

HOW то SEW A ROLLED HEM

Rolled hemming is done by rolling and overedging
the fabric edge.

* Light weight fabrics such as lawn, voil, organdy,

crepe, etc. perform the best.

* Rolled hemming is not suited for heavy or stiff

fabrics.

* MACHINE SET UP

* Be sure the machine is disconnected from the

power source.

* Remove the left needle.

* Insert a #2054 size #10 or #14 needle in the right

needle position.

* Turn the hand wheel toward you until the needle

is at its highest position.

* Unscrew the throat plate screw.

* Install the rolled hemming throat plate being

careful not to catch the threads between the plate
and the machine.

* Replace throat plate screw.

* Open looper cover (page 6).

* Disengage upper knife (page 23).

* Remove the cylinder cover (page 9).

* Align the left edge of the stationary knife with the

“M” mark on the rolled hemming throat plate.

* See page 25 for adjustment.

Note:

Be sure the stationary knife is not in contact

with the edge of the rolled hemming throat
plate.

* Replace the cylinder cover, engage upper knife and

close the looper cover.

Stationary knife

holder

26

Advertising
This manual is related to the following products: