Maintenance, Programming the dial directory, Features – Xerox 7042 User Manual
Page 111: Reports
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Reports
identification — The name or the number of the remote
machine, if programmed.
Page — The number of pages the machine processed in
the transaction.
Time — The length of the communication, in minutes and
seconds.
Code — Communication error code. Refer to the
Maintenance
chapter for a list of the codes.
Job No. — The job number the machine assigned to the
document.
One Touch Dial Directory
The machine can store 18 one-touch telephone numbers. The
One Touch Dial Directory provides the full-program information
for each of the one-touch keys. Refer to the
Programming the
Dial Directory
chapter for information about the full-program
mode.
You can print the report while you are programming a one-touch
key or by scrolling through the reports listed by the REPORT key.
The One Touch Dial List provides the following information:
•
No. — The number of the one-touch key, 01 through 18.
•
Name — The dial directory name that is associated with
the one-touch key.
•
Tel No. — The telephone number in the dial directory.
•
Doc. — The resolution setting for the transmission. Refer
to the
Features
chapter for information on the resolution.
•
Secure — Whether the security mode is selected.
•
Mailbox — Whether the mailbox communication is
selected.
•
International — Whether International communication is
selected.
•
ECM — Whether ECM communication is selected.
9-5