Xerox 7042 - Manual (Page 78)

Transmitting
Secure mode
To transmit a document using the secure mode, the remote unit
must be a 7041/7042 machine. This feature is valid for all the
transmission types (e.g., delayed send, broadcast transmissions,
and direct dial). The secure mode, however, is not available for
polling operations.
When you select a secure transmission, the machine compares
the password you programmed to the password of the remote
unit. If the passwords match, your machine transmits the
document. If the passwords conflict, the communication is
unsuccessful and your machine generates an error code.
To transmit only one document in the secure mode, use the
SECURITY/MAILBOX NO. key to transmit the document. To
transmit all documents in the security mode, set the Secure
Transmission user option (No. 15) to ON. Refer to the
Programming the Machine
chapter for information on how to set
the user option.
NOTE: The one-touch keys may be programmed to transmit in
the secure mode. The secure transmission mode does not
affect how the machine receives a document.
Use the following procedure to transmit using the security mode:
1. Load the document face-down in the ADF.
2. Open the access panel.
3. If desired, select the resolution and the halftone.
4. If desired, set the page count and press the START key.
5. Press the SECURITY/MAILBOX NO. key.
6. Press the START key.
7. Press the REDIAL/t key to display SECURITY ON.
8. Close the access panel and press the START key. The
machine goes to the standby mode for you to dial.
9. Dial the number you want to call.
5-16