Maintenance procedures – Xerox 7042 User Manual
Page 148
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Maintenance Procedures
8.
Position the drum unit with the green drum surface facing
the black toner roller on the developer assembly. Without
touching the green drum surface, hook the drum unit to
the developer assembly. The following figure shows how
to Join the drum unit and the developer assembly:
9.
Holding the developer assembly by the green handles,
align the three shafts on the developer assembly sides
with the slots in the machine frame. The developer
assembly handles align with the green arrow inside the
machine. Lower the assembly into the machine.
The following figure shows how the shafts on the
assembly align with the slots:
10-26