Supplies and accessories – Xerox 7042 User Manual
Page 167
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Supplies and Accessories
2.
Remove the developer assembly from the machine. The
following figure shows how to remove the developer
assembly;
CAUTION
Always hold the developer assembly by the green
handles. Do not touch the green drum area or the
black toner roller. Do not leave the drum unit out
of the machine for an extended period.
Touching the drum or exposing the drum unit to
light could lower the print quality.
3.
Separate the drum unit from the developer assembly.
The following figure shows the drum unit and the
developer assembly;
4.
Place the developer assembly on a flat clean surface.
Discard of the used drum unit properly.
11-15