Xerox 7042 User Manual
Page 161
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Supplies and Accessories
Separate the drum unit from the developer assembly.
The following figure shows the drum unit and the
developer assembly:
5.
Place the drum unit on a level surface. Cover the drum
unit with a clean cloth to protect the unit from exposure to
light.
6.
Place the developer assembly over paper to protect the
surface on which you are working.
7.
Tap the toner cartridge several times to make any
remaining toner fail into the developer assembly.
NOTE: Avoid touching the toner to your clothing since the
toner can not be removed easily. If the toner sticks to
your clothing, immediately rinse out the toner with cold
water.
11-9