ADLINK DAQe-2214 - Manual (Page 31)

Signal Connections 19
3 Signal Connections
This chapter describes DAQ-/DAQe-2213/2214 card connectors
and the signal connection between the DAQ-/DAQe-2213/2214
card and external devices.
3.1 Connectors Pin Assignment
The DAQ-/DAQe-2213/2214 card is equipped with two 68-pin
VHDCI-type connector (AMP-787254-1) and a 20-pin ribbon male
connector. These are used for digital input/output, analog input/
output, timer/counter signals, and SSI (System Synchronous Inter-
face). The pin assignments of the connectors are defined in
Table 3-1, Table 3-2, and Table 3-3.