ADLINK DAQe-2214 - Manual (Page 35)

Signal Connections 23
CN1/CN2 Connector Signal Description
Signal Name Reference Direction Description
AIGND — —
Analog ground for AI. All three ground
references (AIGND, AOGND, and
DGND) are connected together on
board.
AI<0..63/95> AIGND Input
Analog Input Channels 0 - 16. Each
channel pair, AI<i, i+8> (I=0..7) can be
configured on either two single-ended
inputs or one differential input pair
(marked as AIH<0..8> and AIL<0..8>).
AISENSE AIGND Input
Analog Input Sense. This pin is the
reference for any channels AI<0..63>
in NRSE input configuration.
EXTATRIG AIGND Input External AI analog trigger
DA0OUT AOGND Output AO channel 0
DA1OUT AOGND Output AO channel 1
AOEXTREF AOGND Input
External reference for AO
channels
AOGND — — Analog ground for AO
EXTWFTRIG DGND Input External AO waveform trigger
EXTDTRIG DGND Input External AI digital trigger
RESERVED — Output Reserved. Leave these open.
GPTC<0,1>_SRC DGND Input Source of GPTC<0,1>
GPTC<0,1>_GATE DGND Input Gate of GPTC<0,1>
GPTC<0,1>_OUT DGND Input Output of GPTC<0,1>
GPTC<0,1>_UPDOWN DGND Input Up/Down of GPTC<0,1>
EXTTIMEBASE DGND Input External Timebase
DGND — — Digital ground
PB<7,0> DGND PIO* Programmable DIO of 8255 Port B
PC<7,0> DGND PIO* Programmable DIO of 8255 Port C
PA<7,0> DGND PIO* Programmable DIO of 8255 Port A
AFI0 DGND Input
Auxiliary Function Input 0
(ADCONV, AD_START)
AFI1 DGND Input
Auxiliary Function Input 1 (DAWR,
DA_START)
Table 3-4: CN1/CN2 Signal Description