ADLINK DAQe-2214 - Manual (Page 67)

Operation Theory 55
Stop Modes of Scan Update
You can call software stop function to stop waveform generation
when it is still in progress. Three stop modes are provided for
timed waveform generation meant to stop the waveform genera-
tion. You can apply these three modes to stop waveform genera-
tion no matter infinite or finite waveform generation mode is
selected.
Figure 4-18 illustrates an example for stop mode I, assuming the
data in the data buffer are 2V, 4V, 2V, and 0V. In this mode, the
waveform stops immediately when software command is asserted.
.
Figure 4-18: Stop Mode I