Final adjustments, Specifications – Display Devices Lifts up up 400 lbs User Manual
Page 19
1/17/07
19
Final Adjustments
Operate the lift up and down several times to verify all adjustments and ensure proper
overall operation.
Place the lift in Manual Mode – press and hold Override, press and release UP, relase
Override. Raise the lift to its home position with the UP button slowly, carefully, and
intermittently. Observe carefully the cables rigged to the sides of the lift to watch for
any problems.
Bring the lift down with the DOWN button. Again, watch for any problem and ensure
proper overall operation. Adjust the closure system as needed.
Operate the lift up and down several times.
Place the lift in automatic mode. (press and hold OVERRIDE, press and release STOP.
If you did not set the 12-volt trigger and AC configuration, revisit Part 1 and set the Dip
Switches for your system design.
The lift is now installed and ready for operation.
Specifications
DataLite LCD-100
DataLift DL3B
DataWide DL3W
Operating
Temperature Range
32° – 104°F
0° – 40°C
32° – 104°F
0° – 40°C
32° – 104°F
0° – 40°C
Horsepower
1/12 – 110V or 220V
1/12 – 110V or 220V
1/12 x 2 – 110V or 220V
Current Draw
.6A @ 110V
.3A @ 220V
1.2A @ 110V
.6A @ 220V
2.4A @ 110V
1.2A @ 220V