Display Devices Lifts up up 400 lbs - Manual (Page 3)

1/17/07 3
Important Installation Notes
Before starting…
DO Read all instructions before installation.
DO Leave wood blocks in place to protect you and the lift from damage until fully and
securely mounted.
DO Ensure the electrical outlet is readily accessible and complies with the lift and
projector specifications for voltages and amperages. (Show diagrams of 110v and 220v
receptacles.)
DO Check above the ceiling for obstructions, i.e., water pipes, wires, cables, duct work,
extreme temperature variations, etc. before beginning installation.
DO Ensure the ceiling structure is capable of holding at least four times the combined
weight of the lift and projector. This is a minimum requirement. Follow any local or
state codes that apply to your specific area.
DO Plan out your mounting hardware and tool requirements before installation.
DO Attach the projector, ceiling closure system, or other items to the lift only when the
lift has been properly installed and tested.
CAUTION:
Anytime that you are installing or performing maintenance on the lift,
disconnect power at the receptacle or breaker/fuse panel, program the lift to
MANUAL MODE, or activate the NO MOVEMENT switch on the side of the
control box to prevent inadvertent movement of the lift.