Display Devices Lifts up up 400 lbs - Manual (Page 7)

1/17/07 7
Installation – Enclosure Housing and Lifts
Mounting hardware is not provided unless you ordered the option UMK (Universal
Mounting Kit). Be sure to have all your mounting hardware and tools readily accessible
before installation. Consult your local building codes for proper structural attachment.
Tools you will need:
Safety glasses, Socket set, Box wrenches, Adjustable wrench, Magnetic torpedo level
(two, if possible), Ladders or manlift, Genie Lift or heavy straps and pulleys (for DataLift
and DataLite Models), Knockout kit or Hole saw, ½” Drill and/or ½” Hammer drill.
We recommend you install mounting hardware into a structural channel. All hardware
should be at least ½” (M12) in diameter for the DataLift (DL3B) and DataWide
(DL3W) series, or 3/8 ” (M10) for the DataLite (LCD100) series.
You should use angled stabilizers if threaded rods extend 2’ (60 cm) or more between
structural channel and the lift. You should also leave the threaded rods slightly loose to
ease in alignment and leveling after installing the lift. You need to make sure all
hardware is securely tightened at the end of your installation.
If space permits: use
structural channel left-to-
right and front-to-back for
better positioning of the lift.
Attach to structural ceiling