Display Devices Lifts up up 400 lbs - Manual (Page 9)

1/17/07 9
Lift Installation
CAUTION!
The lift is heavy. Take proper safety precautions and get adequate help when
raising the lift. We recommend using a Genie™ or scissor-type lift when
installing the heavier DataLift and DataWide models. Add a safety line to the
lift to prevent it from falling to the floor in the event of an accident.
Remove the mounting adapter from the bottom frame of the lift (7/16” socket/wrench).
Before you begin, be sure the threaded rods have a nut and split washer above the lift
frame, and a flat washer and nut below the frame. These can be temporarily held in
place with tape, glue or gum.
Use 3/8” hardware for the DataLite models, and 1/2” hardware for the larger, heavier
DataLift and DataWide models.
Raise the lift into position and add hardware. Follow the hardware order to ensure
stability and accuracy when leveling the lift after you have successfully mounted it.
Hardware Order