Display Devices Lifts up up 400 lbs - Manual (Page 29)

1/17/07 29
Programming Maintenance and Show Positions
If yes, press UP
and lift is ready for
operation
If yes, press UP
and lift is ready for
operation
If No, press UP
and start again
If No, press UP
and start again
Press DOWN to lower
lift to desired
Maintenance position
(lift will stop when button
is released)
Press DOWN to lower
lift to desired Show
position (lift will stop
when button is released)
Set Show Position
Press SET & UP
Set Maintenance
Position
Press SET & UP
Return to AUTO mode
Press OVERRIDE &
STOP. Press UP
button, lift should travel
to home position
Return to AUTO mode
Press OVERRIDE &
STOP. Press UP
button, lift should travel
to home position
To test:
Press DOWN button, lift
should travel to position
just set and then stop
To test:
Press OVERRIDE &
DOWN buttons, lift
should travel to position
just set and then stop
Put the lift into MANUAL
MODE – Press
OVERRIDE & UP