EXFO VDSL2 - Manual (Page 159)

Configure Tests for DSL/IP Triple-Play Verification
Copper, VDSL2, ADSL2+, and IP Triple-Play Test Set 151
Configure DSL/IP Tests
Configure DSL/IP Tests
Auto Test
The purpose of the Auto Test function is to:
³
Establish a connection to the DSLAM
³
Log into an ISP
³
Perform a Ping test
The Auto Test tab allows you to select a series of tests to be configured in
the Auto Test procedure.
Your choice of tests to Enable or
Disable are the following:
³
IPTV Analysis runs an auto test for
video. When this entry is enabled,
all other test-choice entries on the
Auto Test pane are automatically
disabled.
³
Data Analysis runs an auto test for
data by enabling the unit to act as
a modem, allowing you to connect from your computer to the internet
via the unit’s Ethernet port. When this entry is enabled, all other
test-choice entries on the Auto Test pane are automatically disabled.
³
VoIP Analysis runs an auto test for voice. When this entry is enabled,
all other test-choice entries on the Auto Test pane are automatically
disabled.
³
CPE Ping Test checks the ICMP echo request during the auto test.
When this entry is enabled, IPTV, Data and VoIP analyses are
automatically disabled.