EXFO VDSL2 - Manual (Page 165)

Configure Tests for DSL/IP Triple-Play Verification
Copper, VDSL2, ADSL2+, and IP Triple-Play Test Set 157
Configure DSL/IP Tests
FTP Speed
The FTP Speed tab allows you to configure the file transfer protocol
parameters for downloading and uploading files to the server.
The available parameters are the
following:
³
Ftp Server Address is the address
of the file transfer protocol (FTP),
maximum 72 characters.
³
Login ID is your user name,
maximum 72 characters. The
default value is anonymous.
³
Password is your user password, maximum 36 characters.
³
Download File Name is the filename requested for downloading,
maximum 128 characters; left blank if no download test is required.
³
Upload File Name is the filename used for uploading, maximum
128 characters.
³
Upload File Size(Kbytes) is the number of bytes or size of the file to be
uploaded to the server.Valid values range from 1 through 65536.
To select the FTP speed parameters to configure:
1. Press the up/down arrows to select the desired parameter.
2. Press to modify the parameter.
3. Use the alphanumeric keypad to enter the value you want to specify.
4. Press to confirm the selection.