EXFO VDSL2 - Manual (Page 184)

Running CPE Tests
176 AXS-200/635
Reading Results
HPNA Info
The HPNA Info tab allows you to view the results of the HPNA devices
detected on the network.
³
Device Detected displays the total
number of detected HPNA devices
on the network.
³
Refresh button allows you to
rerun the DevInfo Test and update
the page with new data.
³
Device MAC Address lists all the
MAC addresses for the detected
HPNA devices.
³
Mode displays Master or Client for the selected device.
³
Link State is the Up to Down (or vice versa) routing protocol of the
network link for the selected device.
³
Sync State is the sync status of the selected device.
³
SW Version is the software version number of the selected device.
³
Chipset Version is the version number of the chipset for the selected
device.
³
Frequency Band displays the range of signal frequency for the
selected device.
To select a detected device:
1. Press
to open the list.
2. In the list, press the up/down arrows to select the MAC address of the
desired device.
3. Press to confirm the selection and view the results.