Ip arrival jitter – EXFO VDSL2 User Manual
Page 205
                                    Advertising
                                    
                                        
                                    
                                
                                 
IPTV Analysis
Copper, VDSL2, ADSL2+, and IP Triple-Play Test Set
197
Reading Results
IP Arrival Jitter
The IP Arrival Jitter tab allows you to view the PASS/FAIL status of the 
registered IP Packet Jitter for the video stream with a selected multicast IP 
address assigned to the specific video channel or Analyzed Stream.
The available test results are the 
following:
³
Max Recorded Jitter is the 
maximum jitter detected, in ms.
³
Average Jitter is the continuous 
running average of the jitter 
detected, in ms.
³
Standard Deviation is based on 
the continuous sample size.
³
Reset Statistics button clears all monitoring values.
The default monitoring interval is 8 minutes.
                                    Advertising
                    
                        
                    
                            
                            
                    This manual is related to the following products: