EXFO VDSL2 - Manual (Page 21)

Getting Started with Copper Qualification Tests
Copper, VDSL2, ADSL2+, and IP Triple-Play Test Set 13
Regional Settings
When you change the selections and press or , the
following actions should be performed:
1. If ProfileName selection is not Default then save modifications (if any)
into the current profile file and proceed with the selected action.
2. If ProfileName selection is Default and modification to the profile has
been made then enter the new name of the profile.
At power up, all settings are read from the last current profile.
³
Enter Profile Name is the new
name of the profile.
To save modifications made to a
CustomProfile:
1. Select Save as New Profile and
create and save a new
CustomProfile name in the
current directory.
2. If the file with CustomProfile
name already exists in the current directory, you will be prompted to
overwrite it.
To cancel modifications made to a CustomProfile:
1. Select Cancel Modifications and reload the current profile with the
default profile.
2. Proceed with the previously selected action ( , , ).
I
MPORTANT
Changes to test parameters will be lost if the unit is turned off
without first saving them to a default or custom profile. The unit
can also be left in suspend mode to avoid loss of test parameters.