B scpi command reference, Quick reference command tree, Mportant – EXFO IQS-1700 High Performance Power Meter for IQS-500/600 User Manual
Page 115
High Performance Power Meter
107
B SCPI Command Reference
This appendix presents detailed information on the commands and
queries supplied with your IQS-1700 High Performance Power Meter.
Quick Reference Command Tree
I
MPORTANT
Since the IQS controllers and expansion units can house many
instruments, you must explicitly specify which instrument you want
to remotely control.
You must add the following mnemonic at the beginning of any
command or query that you send to an instrument:
LINStrument<LogicalInstrumentPos>:
where <LogicalInstrumentPos> corresponds to the identification
number of the instrument.
For information on modifying unit identification, refer to your
platform user guide.
Command
Parameter(s)
P.
ABORt[1..n]
111
FETCh[1..n]
[SCALar]
POWer
DC?
112
FORMat[1..n]
[DATA]
<FormatData>
113
[DATA]?
114
INITiate[1..n]
AUTO
<StartStop>,CONT|NCONt
115
AUTO?
117
IQS controller or expansion unit
identification number (for example, 001)
Instrument slot number (0 to 9)
XXXY