EXFO IQS-1700 High Performance Power Meter for IQS-500/600 - Manual (Page 186)

SCPI Command Reference
178 IQS-1700
Product-Specific Commands—Description
:TRACe[1..n]:MAX?
Description This query returns the maximum value for the
specified trace.
Syntax :TRACe[1..n]:MAX?<wsp>TRC1|TRC2|TRC3|TR
C4
Parameter(s) Trace:
The program data syntax for the first parameter is
defined as a <CHARACTER PROGRAM DATA>
element. The allowed <CHARACTER PROGRAM
DATA> elements for this parameter are:
TRC1|TRC2|TRC3|TRC4.
This parameter is used to select the trace to use.
Each trace corresponds to a channel:
TRC1 - acquisition made on channel 1
TRC2 - acquisition made on the channel 2
TRC3 - acquisition made on the channel 3
TRC4 - acquisition made on the channel 4
Response Syntax <PointMax>
Response(s) PointMax:
The response data syntax for <PointMax> is
defined as a <NR3 NUMERIC RESPONSE DATA>
element.
The response corresponds to the highest value in
the specified trace.
The maximum trace point is returned in the
same unit used to perform the acquisition.