Securing the optical head onto your work surface – EXFO IQS-1700 High Performance Power Meter for IQS-500/600 User Manual
Page 23
Getting Started with Your High Performance Power Meter
High Performance Power Meter
15
Securing the Optical Head onto Your Work Surface
Securing the Optical Head onto Your Work
Surface
Your OHS-1700 Optical Head can be used with a tripod. A metric-based
screw hole is located on the left side of the head and bears the inscription
“M6 X 1” and an imperial-based screw hole is located on the right side and
bears the inscription “1/4-20”.
Once you have installed the head onto the tripod, tighten the tripod screw
to prevent it from turning; which would compromise your test results.
Starting the High Performance Power Meter
Application
Your IQS-1700 High Performance Power Meter module can be configured
and controlled from its dedicated IQS Manager application.
Note: For details about IQS Manager, refer to the IQS platform user guide.
Tripod
Tripod screw
Metric-based
screw hole
Imperial-based
screw hole