Starting the acquisition – EXFO IQS-1700 High Performance Power Meter for IQS-500/600 User Manual
Page 76
Advertising
Performing Acquisitions
68
IQS-1700
Starting the Acquisition
Starting the Acquisition
Once you have set your parameters, you can start the acquisition.
To start an acquisition:
1. Select the Instrument function tab.
2. From the Acquisition tab, press Start.
Data acquisition can be terminated at any time by clicking Stop. The
accumulated data is available in the data file.
If you want to start a graph acquisition at the same time, you must enable
the Graph function in the same tab (for more information on the graph
acquisition and visualization mode, see Performing and Analyzing Graph
Acquisitions on page 75).
Note: You cannot activate Graph mode after the acquisition has already been
started.
Advertising