EXFO IQS-1700 High Performance Power Meter for IQS-500/600 - Manual (Page 137)

SCPI Command Reference
High Performance Power Meter 129
Product-Specific Commands—Description
:MMEMory[1..n]:ACQuisition:DURation:
MMAXimum:STATe
Description This command is used to set the timer state of
the Min. Max. acquisition.
Syntax :MMEMory[1..n]:ACQuisition:DURation:MMAXim
um:STATe<wsp><StateDurMinMax>
Parameter(s) StateDurMinMax:
The program data syntax for <StateDurMinMax>
is defined as a <Boolean Program Data>
element. The <StateDurMinMax> special forms
ON and OFF are accepted on input for increased
readability. ON corresponds to 1 and OFF
corresponds to 0.
Changes the timer state for the Min. Max.
acquisition.
0 -Timer for the Min. Max. acquisition is disabled.
1 -Timer for the Min. Max. acquisition is enabled.
Example(s) MMEM:ACQ:DUR:MMAX:STAT ON
See Also MMEMory:ACQuisition:DURation:MMAXimum
MMEMory:ACQuisition:DURation:MMAXimum:ST
ATe?
MMEMory:ACQuisition:DURation
MMEMory:ACQuisition
INITiate:AUTO
INITiate:EXTRema