EXFO IQS-1700 High Performance Power Meter for IQS-500/600 - Manual (Page 164)

SCPI Command Reference
156 IQS-1700
Product-Specific Commands—Description
:SENSe[1..n]:POWer[:DC]:RANGe:AUTO
Description This command enables or disables the
automatic power measurement range
(Autorange) for the currently selected channel.
Syntax :SENSe[1..n]:POWer[:DC]:RANGe:AUTO<wsp>
<AutoRangeState>
Parameter(s) AutoRangeState:
The program data syntax for <AutoRangeState>
is defined as a <Boolean Program Data>
element. The <AutoRangeState> special forms
ON and OFF are accepted on input for increased
readability. ON corresponds to 1 and OFF
corresponds to 0.
Set the <AutoRangeState>, where:
0 or OFF -Disables the AutoRange
1 or ON -Enables the AutoRange
Example(s) SENS:POW:RANG:AUTO 1
Notes The Autorange function can be performed in
Continuous acquisition mode only. When
Autorange is deactivated, LR1 is activated by
default.
See Also SENSe:POWer:[DC]:RANGe:AUTO?
SENSe:POWer:[DC]:RANGe
SENSe:POWer:[DC]:RANGe:SCALe
SENSe:POWer:[DC]:RANGe:SCALe?
SENSe:POWer:[DC]:RANGe:SCALe:LIST?