Managing wavelength lists – EXFO IQS-1700 High Performance Power Meter for IQS-500/600 User Manual
Page 34
Advertising
Setting Up Your High Performance Power Meter
26
IQS-1700
Managing Wavelength Lists
Managing Wavelength Lists
The wavelengths you want to use with your IQS-1700 and OHS-1700 must
be entered in the Wavelength list. Please refer to the Certificate of
Compliance supplied with your power meter for information on the
wavelength range.
To add a wavelength to the list:
1. From the Settings function tab, select the Lists tab.
2. In the Wavelength list, enter the wavelength value to be added.
You can enter a value with a 0.01 nm resolution.
3. Click
to confirm the new wavelength.
Note: A warning message is displayed if the new wavelength is not within the
power meter’s wavelength range.
Advertising