EXFO IQS-1700 High Performance Power Meter for IQS-500/600 - Manual (Page 128)

SCPI Command Reference
120 IQS-1700
Product-Specific Commands—Description
:MEASure[1..n][:SCALar]:POWer:
MAXimum?
Description This query returns the maximum power
measurement value recorded for a channel in
Continuous acquisition mode.
Syntax :MEASure[1..n][:SCALar]:POWer:MAXimum?
Parameter(s) None
Response Syntax <MaxPower>
Response(s) MaxPower:
The response data syntax for <MaxPower> is
defined as a <NR3 NUMERIC RESPONSE DATA>
element.
This query returns the power measurement
maximum for a channel in the currently selected
unit.
The number of digits after the decimal depends
on the selected resolution. To change the
resolution of the displayed power value in dB or
dBm, use the FORM[:DATA] command. To know
the current measurement unit, use the
UNIT:POWer? query.
Example(s) INIT:EXTR ON
MEAS:POW:MAX?
See Also INITiate:EXTRema
MEASure:SCALare:POWer:MIN?