Entering values using sliders and numeric boxes – EXFO IQS-1700 High Performance Power Meter for IQS-500/600 User Manual
Page 27
Getting Started with Your High Performance Power Meter
High Performance Power Meter
19
Entering Values Using Sliders and Numeric Boxes
Entering Values Using Sliders and Numeric
Boxes
Many parameters in IQS Manager and module applications can be set
using the following tools.
Slider: Drag it to the desired value on the scale below.
Navigation buttons: Click either buttons to move the slider. The slider
moves by steps corresponding to the number in the fine-tuning box,
which you can change by using the up and down arrow buttons next to
the box. You cannot change the list of fine-tuning values from here.
Numeric box: Click it to display the on-screen numeric pad, which you
can use to enter a power value.
To enter a value using the numeric box:
1. Use the
button to clear the entry display.
2. Enter the value.
3. Click OK to confirm the value.
Numeric box
button
Fine-tuning
box
Slider
Navigation buttons
Parameter identification
Toggle button
Backspace button
(to correct a value)
Clear button
Entry display