EXFO IQS-1700 High Performance Power Meter for IQS-500/600 - Manual (Page 126)

SCPI Command Reference
118 IQS-1700
Product-Specific Commands—Description
:INITiate[1..n]:EXTRema
Description This command starts or stops the Min./Max.
power measurements in Continuous acquisition
mode for all channels.
At *RST, all acquisitions are stopped (the value is
set to OFF).
Syntax :INITiate[1..n]:EXTRema<wsp><Extrema>
Parameter(s) Extrema:
The program data syntax for <Extrema> is
defined as a <Boolean Program Data> element.
The <Extrema> special forms ON and OFF are
accepted on input for increased readability. ON
corresponds to 1 and OFF corresponds to 0.
This parameter allows to change the Min./Max.
measurement status:
0 - Stops the Min./Max. measurements.
1 - Starts the Min./Max. measurements.
Example(s) INIT:EXTR ON
See Also ABORt
INITiate:AUTO
INITiate:AUTO?
INITiate:EXTRema?
MMEMory:ACQuisition
MMEMory:ACQuisition?
TRACe:POINt