Datalogic Scanning Matrix 400 - Manual (Page 15)

RAPID CONFIGURATION
5
1
STEP 3 – MOUNT AND POSITION THE READER
1. To mount the Matrix 400™, use the mounting brackets to obtain the most suitable
position for the reader. Two of the most common mounting configurations are shown in
the figures below. Other mounting solutions are provided in par. 3.3.
Figure 4 –Positioning with Mounting Bracket (Back)
Figure 5 –Positioning with Mounting Bracket (Side)
2. When mounting the Matrix 400™ take into consideration these three ideal label position
angles: Pitch or Skew 10° to 20° and Tilt 0°, although the reader can read a code at any tilt
angle.
P
S T
Minimize Assure at least 10° Minimize
Figure 6 – Pitch, Skew and Tilt Angles
Tilt
Pitch
Skew
Pitch