Kipp&Zonen COMBILOG Data Logger - Manual (Page 111)

Check
sum
request telegram reply with orderly
performance
reply in
case of er-
ror
Repeat reading the events from pointer 2
with # aa f cc <cr> > 1 b..b cc <cr>
> 0 e cc <cr> NAK
Pointer setting (2) to memory start
with # aa c cc <cr> ACK NAK
Pointer setting (2) to a certain date
with # aa c t..t cc <cr> ACK NAK
Pointer setting (2) to a position X
with # aa c x..x cc <cr> ACK NAK
Sending password
with # aa P p.p cc <cr> ACK NAK
write date and time
with # aa G t..t cc <cr> ACK NAK
read date and time
with # aa H cc <cr> > t..t cc <cr> NAK
read measuring rate and averaging interval
with # aa X cc <cr> > n..n cc <cr> NAK
write measuring rate and averaging interval
with # aa Y n..n cc <cr> ACK NAK
delete data memory
with # aa C.ALL cc <cr> ACK NAK
read number of events
with # aa N cc <cr> > a..a cc <cr> NAK
transparent modus on (only at masterfunction)
with # aa T1 cc <cr> ACK NAK
transparent modus off (only at masterfunction)
with # aa T0 cc <cr> ACK NAK
Table 11.9 Instruction set in the ASCII-Protokoll
Note: In case a password is entered, by means of the configur-
ation program, this password has to be transmitted to the data
logger before memory reading or erasing respectively before
Hardware Manual COMBILOG 1022
111