Kipp&Zonen COMBILOG Data Logger - Manual (Page 16)

 LED-status indication for the ethernet interface
 LC-display (4 x 16 characters) and push-/turn knob for op-
eration
Measured value processing:
 Linearisation, scaling and conversion into physical units
 Option to adjust, modify or reset the processing paramet-
ers individually
 Master function to retrieve data from external modules
 Programmable averaging
 Automatic message transmission via modem or SMS
 Non-volatile storage for program, parameters and data
Configuration:
 Configurable with PC-software under
WINDOWS™ 98 / ME / NT / 2000 / XP
 Menu-guided sensor selection in plain text
 Free configuration of up to 32 channels
 Data base for the most common sensors
 Definition of user-specific sensors
 Setting of type and principle of measurement
 Display of pin assignment
 Input of linearisation
 Alarm settings
 Programmable error handling
 Arithmetic combination of sensor channels
 Configurable measuring rate and averaging interval
 Configuration on file (offline-operation)
 Configuration via bus (online-operation)
Programming:
 Allocation of address and baud rate via bus
 Password to save the configuration and the data memory
 Synchronizing of date and time with the host PC
Hardware Manual COMBILOG 1022 16