Kipp&Zonen COMBILOG Data Logger - Manual (Page 99)

Note: The address “127” is reserved for broadcast transmis-
sion in the PROFIBUS-protocol (Level 2) and may only be as-
signed for these cases.
Adjustment via Interface, RS232 by means of the configur-
ation software:
In addition to the bus interface RS485, the data logger
COMBILOG 1022 has an RS232 computer interface. By means
of the configuration software COMBILOG.EXE addresses can
be assigned and bus parameters can be adjusted via the
RS232 interface similarly as when using the RS485 interface.
Hardware Manual COMBILOG 1022
99