Kipp&Zonen COMBILOG Data Logger - Manual (Page 128)

<channel value Pn> binary 1, 2 or 4 byte
ReqDataUnit: [<tare/reset> [ <P1> [ .... [ <Pn>] ] ] ]
ResDataUnit: <K1 > . . . . . . . . . . . . . . . . < Kn >
If a bit is set in the <tare/reset> byte, the corresponding sensor
channel is tared or reset respectively. The values following the
<tare/reset>-byte are allocated to the writeable channels of the
data logger, according to the order of their appearance. Write-
able channels are setpoint channels and digital output chan-
nels.
Hardware Manual COMBILOG 1022 128