Labconco Protector Work Stations 3930021 - Manual (Page 12)

Chapter 3: Getting Started
Product Service 1-800-522-7658 8
Unpacking the Enclosure
Carefully remove the shrink-wrap or carton on the enclosure and inspect it for
damage that may have occurred in transit. If damaged, notify the delivery carrier
immediately and retain the entire shipment intact for inspection by the carrier.
DO NOT RETURN GOODS WITHOUT THE PRIOR
AUTHORIZATION OF LABCONCO. UNAUTHORIZED
RETURNS WILL NOT BE ACCEPTED.
IF ENCLOSURE WAS DAMAGED IN TRANSIT, YOU MUST
FILE A CLAIM DIRECTLY WITH THE FREIGHT CARRIER.
LABCONCO CORPORATION AND ITS DEALERS ARE NOT
RESPONSIBLE FOR SHIPPING DAMAGE.
Do not discard the packing material until you have checked all of the components
and tested the enclosure. We recommend that you do not remove the enclosure
from its shipping container until it is ready to be placed in its final location. Move
the unit by placing a flat, low dolly under the shipping skid, or by using a floor
jack.
Do not move the enclosure by tilting it onto a hand truck.
Installing the Enclosure on a Supporting
Structure and Work Surface
Use caution when lifting or moving the enclosure.
When installing the enclosure onto a chemical-resistant work surface or benchtop,
ensure that the structure can safely support the combined weight of the enclosure
and any related equipment. The work surface should be at least as wide as the
enclosure to properly support it. The front of the enclosure should be aligned
within 0.3" of the front of the work surface. Mounting holes are provided in the
Labconco accessory work surfaces to secure the enclosure.
The United
States
Interstate
Commerce
Commission
rules require
that claims be
filed with the
delivery
carrier within
fifteen (15)
days of
delivery.


!